Write us!




    Please send me your current MSM brochure!

    [recaptcha]

    Call us!



    We can be reached by telephone
    every day from 8 am – 5 pm

    General Office
    +49 7644 9231-0

    Technical Advice
    Mr. Daniel Laile
    +49 7644 9231-104

    Kontakt

    Location




    MSM Markier-Sensor-Systeme GmbH
    Benzstraße 1
    79341 Kenzingen
    Germany
    Phone: +49 7644 9231-0
    Fax: +49 7644 9231-199
    info@msm-technik.de

    INK CONTAINERS

    Ink containers are available in two sizes: 1-liter tanks for applications with a low fluid consumption and 10-liter tanks for frequent marking processes with a longer-lasting fluid supply. All tanks are suitable for solvent-based fluids and are not subject to the pressure vessel regulations. The following options are available for the paint spraying systems:

    Level monitoring • agitator • circulation system
    parallax background

    OPTIMUM SUPPLY

    Ink containers for your system

    TK11 series


    The TK11 consists of a 1-liter bottle container. It is made of polypropylene, and the tank mount is made of stainless steel. The maximum permissible air pressure is 0.8 bar. Level monitoring can be installed on the side of the container to ensure the fluid supply in container. The level is monitored visually via display LEDs at the tank mount and the control device as well as via a potential-free output for external processing.

    Dimensions (HxWxD): 240 x 120 x 160 mm³

    TK15 series


    The TK15 is a 10 liter fluid tank. Made of thick-walled stainless steel, it features a maximum permissible air pressure of 2.0 bar. The tank can also be equipped with an optional float switch to monitor the filling level. The level is monitored visually via a display LED at the control device as well as via a potential-free output for external processing. Thanks to a potential equalization in the control device, the tank is explosion-proof.

    Dimensions (HxWxD): 310 x 311 x 254 mm³

    SPECIAL DESIGNS


    The TKK11 is a special design consisting of two TK11 tanks. A diverter makes it possible to easily switch between the tanks that are connected to the control device to ensure marking fluid refills without interruptions. This provides the advantage that the productions process is not disrupted.

    Dimensions (HxWxD): 310 x 311 x 254 mm³